Remote healing

 This will bring together some information that is in several separate files already with a little additional information  about remote or distant healing This will probably just be a quick file that might be expanded  later rather than being comprehensive.

Distance treatments
 There is a common tendency to think of distance healing work as requiring great effort as
though you have to personally  throw the energy across the distance. In fact it requires  no
more effort to send healing energies  across the ocean than it  requires to send it through
your hands as you touch  someone, or as you put crystals on them or do other work.
Just as in direct treatment you activate energy or use crystals and allow the healing effect  to flow to where it is needed . Distance does   not interfere with reception.
A recipient must be willing to accept the treatment or the energy will not effect them.

Most  remote work  is directed by intention. Simply intend to send healing to the person
where ever they are and send the treatment There are several ways to make this more
effective . It is quite normal to be uncertain at first that this is working after a while you
usually develop  a sense of connection and know when you are doing an effective treatment
whatever   method you are using.
Start from being grounded and centered and connect with source or activate a shakti or do a crystal layout with focused intention however you do it for an in person treatment.
The crystal empowerment attunements do include a remote function which will work with
any energy healing system and with crystals which is activated by intending to do so with a
mental command.

There are different ways to work with crystals and directly with energy as shakti and by
invoking or calling on spiritual assistance such as deva or angelic healers .
Some people find that their work is more effective or easier if they begin with a few deep
breaths traditionally in some systems women visualize drawing energy up from the earth and
men visualize drawing energy down from the sky (its a yin yang type thing) .

.Here are some basic remote methods.
1. You can use a photo or drawing as a focus. You can send energy or place a healing
crystal or crystals on the photo or drawing  if the drawing is large enough
you can actually place your stone layout on the drawing with the intention for who and
where  you are sending.
a meridian chart or a  reflexology chart   can be used as a proxy image.
2. You can  lay out a chakra set of crystals  intend they represent the person to be treated
and use a pendulum or crystal wand or your hands to scan the chakra and aura and to send
energy through the chakra  crystals to the person .
3. Use a teddy bear or doll as a proxy or put a pillow on your lap to represent the recipient.
you can put your stones on this proxy  or not as you choose
 4. Intend it. Know that the healing will reach your intended recipient automatically
5. Write the person's name on a piece of paper and hold that piece of paper with the name
          on it between your hands and send healing that way.  Set a programed crystal on the
name or put the name in a box with your charged healing crystals.

 You can visualize the person as though they are right in front of   you and just do a
treatment. or imagine that you are in the same place together.
Another technique is to substitute your body for  theirs doing the treatment  on your  own
body and intending that the energies run to them in those places. You can also do a "spot"
treatment on an organ or other body part just visualize the part and go for it.

Some healing systems use symbols And many people do find it easier to work with a symbol
particularly people who are visually oriented. Here is a link to a symbol I  often use for
remote work there is no required order to draw or visualize  the elements  of this symbol .
 it does not have a name other than representing the concept of  "as Above so Below"
and is used in several energy work and metaphysical systems. You might call it a generic
distant healing symbol. just imagine or intend or mentally draw  this symbol in the air or on
your hands or above your crystals and /or above the person you are treating.
Any attunement you might need to activate it can be called in by intention.

Sending remote healing with a Shakti
With the crystal empowerment Shakti you just run the energies you choose with the remote
function to the person place or group you are treating.
When you are sending energy you can use your hand as a proxy  either designating your
thumb as the proxy and wrapping your fingers around it to send , or hold your left hand as
the proxy with your right hand sending ( can reverse this if it seems right to you).
The remote function will work with shakti from other systems .

People often program a crystal to transmit a  healing energy like Reiki or another healing
shakti  for this  they run  the  energy while holding the intention that the crystal transmit the
energy usually to a particular person. you can give or send the crystal to the recipient or
keep it yourself setting it  in a location (sunny if possible ) where it will not be disturbed .

Programming a crystal for remote healing

Once you have selected the right stone and sensed agreement.
ground  and center yourself specify who and if you know it where the person is as well as
the purpose of the healing  set the intention that all work be for the highest good of the
person and   Clarify your intention, hold the stone in your dominant hand or in both
  hands. Large stones can be touched  rather than held.
 Focus your intention on the stone. Clearly state in your mind or out loud
 what it is you are programming the  stone for. or asking the stone to transmit the  healing
energy  which it acsesses. Visualize or state  the desired result as  clearly as you can .
To program a stone to broadcast  an intention  ,prayer ,desire or affirmation or healing
energy you just intend that it do so .
 One to five minutes  is the standard time to hold the focus. though it can be shorter
continue until you feel that the crystal holds the program
Using a shakti can also shorten the time  (you would run it as you hold the focus)
The program vibration is now set in the crystal.
you may add an ending  intention that the program is locked in and will stay until  cleared
some people breathe deeply and exhale strongly over the crystal  while they focus on the
program.  Intend that the crystal continually broadcast or transmit as  needed.
 
 Using a grid
Crystal Grids   are  arrangements of charged crystals dedicated to a particular purpose such
as sending healing energy or focusing a manifestation or For Earth healing or to bring in
or broadcast specific frequencies of energy into a certain area. Grids are a  way of creating a
continuous flow of energy for a specific purpose on a larger scale or in more detail than by
just programming a single crystal. They are often used to send remote healing to others  You
can make any style of grid and charge and activate it with the intention that it transmit
healing energy to the intended receiver . There are several grids in  a   file in our files section
You may also  place the crystals on a paper marked with a diagram of the
layout for the grid or with a traditional sacred form such as the star of
Solomon, the Sephiroth , the infinity symbol or on or around an image of a symbol
such as the antakarana or a Goddess or  an emblem of your spiritual path..

 A piece of paper with the purpose and/or elements of the purpose for
which the grid is being created and activated written on it is also common . Some
people place a small note under the central crystal. For a remote
healing grid people may place the  name of a person who has requested
healing energy or prayers under a stone in the grid. They may dedicate
each of the secondary stones in the grid to a specific individual or aspect of the
intended purpose . for a healing grid I often use stones in the outer ring for specific parts  of
the healing  such as one for pain relief, one for muscle repair , one for emotional healing , etc.
with the center crystal being the transmitter .
The most common grids are square or  circular  with a center stone. They may
or may not have linking crystals. Linking crystals  are usually small
clear quartz points placed between the other stones in the grid to connect the
stones and direct the flow of  energy . They may be used pointing either inward
or outward from the center and are also often placed between stones in the
outer "wheel" or  or other form of the grid .

 Stones are always cleared before being used in a grid and charged
and dedicated as placed and after placement. Intention is always used to
set the purpose and activate the grid. After the grid is created it is
activated  and the individual crystals are linked energetically . This
is often done with a crystal wand, generator point or laser wand crystal
or can be done with another kind of wand . many people follow a
carefully laid out order for activating the crystals in a grid with a
wand . You may wish to choose a specific "master crystal" or wand for
each of your grids and and keep it with the grid or you may use the
same  crystal or wand to charge many grids . the wand or master crystal
is meditated with and charged before being used to activate the grid.

Grid activation can also be done with intention or with Shakti.

You may hold a transmitter crystal, a laser wand,  or other crystal of your choice and sit in
meditation with the intention of sending a healing treatment to your receiver.
You can intend that the person receive the benefits and energies of particular stones
holding the stone and "beaming the energy.
or you can hold a crystal to amplify and help direct an energy treatment .

Some people like to use a candle as a focus and set crystals around it.
 

Some people like to begin a treatment by saying the name of the recipient out  loud three
times  often a ten to 15 minute period is  used for a remote treatment  but this is not set in
stone

These are just a few of many possibilities for sending remote healing